EuroStat is a simi-glossy permanently ESD conductive solid
vinyl industrial flooring product. Roll goods may be used
as mats or may be permanently glued. Tiles must be glued
The material is manufactured as co-extruded 4'6" x 66' x 2.5mm (.1" gauge)
sheet or as 24" x 24" x 2.0mm (.080"gauge) tile with a hard vinyl wear
layer and a flexible vinyl supporting layer in a semi-glossy finish. Installations
must be made with GZ-C2000 conductive water based acrylic adhesive. Seams
of glue down roll goods must be heat welded. Welding is optional for tiles
whenever ordinary, non-wet maintenance conditions prevail, and welding
is not specified.
GZ-Relesable Adhesive System self stick full surface textile reinforced
adhesive may be used when installing ESD conductive euro-stat vinyl sheet
or vinyl tiles. And can be laid directly onto existing glue-down carpet,
vinyl, structurally sound VAT, epoxy, asbestos, PVC, linoleum, stone, steel,
concrete, particle board or wooden surfaces without removal of existing
ESD Flooring Grounding Recommendations
Make no mistake! To achieve the electrical specifications for the ESD Flooring Materials you have selected your floor must be grounded. Proper grounding techniques are important in even the most basic of environments, and critical in explosive, ordinance and munitions environments. Every installation is different! We generally supply (at no charge with your flooring order) a quantity of grounding hardware appropriate for basic grounding in non-critical standard environments. Further, the quantity of grounding hardware we provide is for use with installations utilizing one of our conductive adhesive floor bonding mechanisms applied to concrete substrates. Using more (or less) grounding locations and hardware will allow you to "fine tune" your conductivity (if required). Conditions such as highly insulative substrates (wood, carpet, etc) that you wish to cover with your new ESD Flooring or environments encountering extreme sensitivity to ESD "events" (hard drive manufacturing, raw sensitive electronic component handling, explosive, munitions etc) may require increasing your grounding hardware requirements. Clients are urged to evaluate their conditions and environment and contact us as needed if additional grounding may be required.
* Basic: Office, Telecom, many manufacturing environments.
* Advanced (or for insulative substrates): Raw component handling, hard drive mg, etc.
* Critical: Ordinance and explosive environments.