ULTRASTAT-SC

ELECTRICAL PROPERTIES:

PTP: 2.5 x 10⁴ to 10⁶ per NFPA-99 @ 500 V
RTG: 2.5 x 10⁴ to 10⁶ per EOS / ESD S7.1

STATIC DECAY:

Conditioning: 50% RH +/-2%@23°C+/-1° for 24 Hours
Test conducted @: 50% RH+/-2%@23°C+/-1°C
Test results=Time, seconds to decay to 10% of initial charge
Results, <0.01 seconds


ULTRASTAT-SD
ELECTRICAL PROPERTIES:

PTP: 2.5 x 10⁶ to 10⁸ per NFPA-99 @ 500 V
RTG: 2.5 x 10⁶ to 10⁸ per EOS / ESD S7.1

STATIC DECAY:

Conditioning: 50% RH +/-2%@23°C+/-1° for 24 Hours
Test conducted @: 50% RH+/-2%@23°C+/-1°C
Test results=Time, seconds to decay to 10% of initial charge
Results, <0.02 seconds

OTHER PROPERTIES:

ASTM F 1700
Passes
Underwriters Laboratories
Meets UL Standard
NFPA Life Safety Code 101
Class I Interior Floor Finish
Critical Radiant Flux (ASTM E 648)
Ultrastat-SC >1.08 W / cm2
Ultrastat-SD >1.03 W / cm2
Smoke Density Test (ASTM E 662)
<450
Flame Spread (ASTM E 84)
<75
Static Load Limit (Modified ASTM F 970-93)
1,500 psi

CONSTRUCTION:

Composition:
Homogeneous solid vinyl tile that has encapsulated conductive elements
of the carbon family distributed throughout the tile.
Gauge:
1/8"
Nominal Sizes:
12" x 12", 36" x 36"
Custom Sizes Available:
24" x 24" available in selected colors only.

INSTALLATION:

Adhesive & Spread Rate:
#150 Conductive Epoxy Adhesive; Covers 150 square feet / gallon.
Trowel Size:*
Type one: 1/16"x1/16" Square Notch with 1/16" Flats
Type two: 1/16"x1/16" Half Circular Notch with 1/32" Flats
Grounding:
One 2"x 24" copper strip installed every 2,000-2,500 feet.

Trowel size is dependent upon tile size, surface type and condition,
Please refer to installation instructions for proper trowel size selection.