DuroStat SMT Conductive & Dissipative Vinyl Tile:

Optimum ESD / Static Control Protection

  

Construction

DuroStat SMT ESD control vinyl tile and GZ C-2000 conductive adhesive are components of a precision engineered system of advanced static control flooring.   Available in SC (static-conductive) and SD (static-dissipative) our tiles contain proprietary encapsulated conductive elements distributed evenly throughout the tile to provide exceptional , electrically consistent, through-tile-to-ground charge decay.  Unlike other ESD Tiles these encapsulated conductive elements retain their conductivity for life while providing the electrical assurance you can count on in the most demanding of environments.  

Homogenous Vinyl Tile
Homogenous Vinyl Tile cross section, note conductive elements throughout thickness

The performance of this solid vinyl tile is not dependent on wear layers, subsurface layers, internal antistats, or humidity and features a lifetime warranty on electrical conductivity!

Specifications
ITEM Standard test Method ASTM Spec Conductive Tile Static dissipative Tile
ELECTRICAL / ELECTROSTATIC PROPERTIES
Electrical Resistance Electrical Resistance
-Surface to Surface

-Surface to Ground 		ESD S 7.1 (100V)
ASTM F-150 (100V)
NFPA 99 (500V)
DIN 51953 (500V)
2.5 X 104~106 Ω
(SD: 106~109)
2.5 X 104~106
106~108
<2.5 X 104~
<2.5 X 104~
 Electrostatic Propensity
(=Static Generation)
ESD STM 97.2
-
Less than 20 volts
Less than 20 volts
Static Decay  Static Decay Federal Test Method 101B Method 4046 at 15% Relative Humidity
 < 0.5 sec
 0.01 sec
0.01 sec
 OTHER PROPERTIES
CEN Classification CEN Classification DIN EN 685  
Class 34 + 43
Composition of Material Composition of Material ASTM F 1700
Certificate of Compliance 		 
Homogeneous
Thickness Thickness ASTM F 386, DIN EN 428
as specified ±0.005 in. (0.13mm)
.118", 3mm
Nominal Sizes Nominal Sizes ASTM F 536, DIN EN 427
±0.016 in./lin. Ft (0.4mm/304.8 mm)
12" x 12"
Squareness Squareness ASTM F 540
maximum 0.010 in. (0.25 mm)
<0.010"
Residual Indentation Residual Indentation ASTM F1914
DIN EN 433
average less than 8%,
max. single reading 10%
< 7%
Flexibility Flexibility ASTM F 137
no crack or break
No crack or break
Dimensional Stability Dimensional Stability ASTM Fed. Std. No. 501a
Method 6211, DIN EN 434
<0.020"/ft (0.51 mm/304.8 mm)
<0.015"/ft
Resistance to Chemicals Resistance to Chemicals ASTM F 925
DIN EN 423
No more than a slight change in surface dulling, surface attack or staining
no more than a slight change in surface dulling, surface attack, or staining
Resistance to Heat Resistance to Heat ASTM F 1514
∆<8 ave., max
<∆E=2.0
Resistance to Light Resistance to Light ASTM F 1515
∆E<8 ave., max
<∆E=6.0
Static Load Limit Static Load Limit Modified ASTM F 970-00
-
2,500 psi
Smoke Density Smoke Density ASTM E 662
<450
<450
Flame Spread Flame Spread ASTM E 84, NFPA 225
<75
<75
Fire Resistance Fire Resistance DIN 4102  
B1
Critical Radiant Flux ASTM E 648, NFPA 253  
>1.08 W/cm2(class I Interior Floor Finish, NFPA Life Safety code 101)
Abrasion Resistance   Abrasion Resistance ASTM D 1044,
CS-10-F Wheel,
500Gm Weight 		 
Cycle
10,000
% Gauge Loss
1.60
Resistance to Wear DIN EN 660-1  
M
Effect of Castor Chair Effect of Castor Chair DIN EN 425  
No Damage
Color Fastness  Color Fastness ISO 105 B02  
At least 6
Standard for Health Care Faculties Standard for Health Care Faculties NFPA 99  
Confirms to the requirements of NFPA 99 in effect at the time of installation
Fulfils product requirements Fulfils product requirements DIN EN 649  
yes
Underwriters Laboratories Underwriters Laboratories UL 779  
Meets UL Standard
WARRANTY
  Free from defects in Workmanship and materials*    
Ten Years
Conductivity Conductivity*  
 
Lifetime

 

Navigation
Technical Documents
Order Free Samples
Get Free Quote
Order Now

Other ESD Tiles Options



Copyright 2007 ESD Vinyl Tile
An ESD Vinyl Tile division of Ground Zero Electrostatics.